BRAKE FLUID:

It is important that the proper level of brake fluid is maintained in the reservoir. Remove the cap, washer and diaphram. Fill with S.A.E. J1703 Brake Fluid up to the level mark (1) inside the reservoir. Reinstall the diaphram, washer and cap securely. Whenever the level falls near the bottom of the reservoir, check the brake pads for wear (BRAKE PADS). If the brake pad wear does not exceed the limits, this will ussually indicate a fluid leak.

BRAKE PADS:

If the pad (1) is worn to the red line (2), replace all front pads as a set.